Brother P-touch PT-1750 Label Maker Manual

The Brother P-touch PT-1750 is a compact, portable electronic label maker designed for home and office use. It features a full keyboard, LCD display, multiple font styles and sizes, decorative frames, automatic tape cutting, and supports various tape widths. Powered by AC adapter or batteries, it allows for easy creation of custom labels for organization, identification, and decoration. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Keyboard, LCD Display, Tape Cassette Slot, Power Switch, AC Adapter Port, Battery Compartment, Print/Cut Mechanism.

Unpacking and Setup

Unpack and inspect contents. Ensure all parts are present.

1. Power the unit: Insert 6 AA batteries or connect the AC adapter.
2. Load tape: Open cassette cover, insert tape cassette with window facing up, close cover.
3. Turn on: Press POWER switch; LCD should illuminate.
4. Set language: Use FUNCTION menu to select language if prompted.

WARNING! Use only Brother TZ tape cassettes. Incorrect tape may damage the printer mechanism.

First-Time Operation

Power on the label maker; follow on-screen prompts.

1. Create a test label: Type text using keyboard; press PRINT to print and cut.
2. Adjust settings: Use FUNCTION key to access font, size, style, frames.
3. Explore templates: Pre-set formats for common labels (file folders, name badges).
4. Conserve tape: Use preview mode to check layout before printing.

CAUTION! Keep fingers away from cutting mechanism during operation.

Specifications

• Model: Brother P-touch PT-1750.
• Tape Compatibility: Brother TZ series laminated tape cassettes.
• Tape Widths: 3.5mm, 6mm, 9mm, 12mm.
• Print Resolution: Standard resolution for clear text and symbols.
• Fonts & Styles: Multiple fonts, sizes, bold, italic, underline, frames.
• Power Supply: 6 AA batteries or AC adapter (included).
• Display: LCD with backlight (on some models).
• Auto-Cut: Yes, after each label.
• Memory: Stores frequently used labels (capacity varies).
• Operating Temp: 50°F to 104°F (10°C to 40°C).

Controls and Functions

Access functions via keyboard and LCD menu. Front Panel: POWER, PRINT, FUNCTION, Arrow Keys, Clear, Space, Enter.

Key Functions: POWER (On/Off), PRINT (prints and cuts), FUNCTION (accesses settings), Arrows (navigation), CLEAR (delete/exit).

Text Formatting: Font (multiple styles), Size (small, medium, large), Style (bold, italic, underline), Frames (decorative borders). Label Settings: Tape width detection, Auto-cut on/off, Mirror printing, Sequential numbering. System: Language, LCD contrast, Reset to factory defaults.

Creating Labels

Basic label creation steps.

1. Turn on and ensure tape is loaded.
2. Type text using keyboard; use SPACE, ENTER as needed.
3. Format text: Press FUNCTION, select Font, Size, Style, Frames.
4. Preview: Check LCD before printing.
5. Print: Press PRINT; label prints and cuts automatically.
6. Apply: Peel backing and apply label to surface.

Tip: For long labels, use "Chain Print" to print multiple copies continuously.

Advanced Features

Utilize advanced functions for specialized labels.

1. Sequential Numbering: Print labels with incrementing numbers (e.g., 1, 2, 3).
2. Mirror Printing: For printing labels to be viewed from reverse side (e.g., windows).
3. Memory Storage: Save frequently used labels for quick recall.
4. Symbols & Icons: Access built-in symbols (arrows, warning signs, etc.).
5. Text Effects: Outline, shadow (if supported).
6. Bar Codes: Print simple bar codes for inventory (select models).

Note: Some features may vary based on tape width and model capabilities.

Tape Loading and Replacement

Replace tape when low or for different color/width.

1. Power off the label maker.
2. Open cassette cover: Press release button/latch.
3. Remove old cassette: If present.
4. Insert new cassette: Ensure correct orientation (window up, arrows aligned).
5. Close cover firmly until it clicks.
6. Power on; machine auto-detects tape width.

WARNING! Do not force cassette. Use only genuine Brother TZ tapes.

Care & Maintenance

Unplug/remove batteries before cleaning. Use dry, soft cloth; avoid liquids.

1. Exterior: Wipe with dry cloth.
2. Keyboard & Display: Use slightly damp cloth if needed; dry immediately.
3. Tape Path: Keep free of adhesive residue; use recommended cleaning tape if available.
4. Storage: Store in cool, dry place; remove batteries if not used for extended periods.

CAUTION! Do not use solvents, abrasives, or compressed air.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © Brother Industries, Ltd. For support, visit www.brother-usa.com or contact Brother Customer Service at 1-877-267-8437. This product may be covered by one or more patents. See www.brother.com/patent.

Troubleshooting

Reset: Function > Settings > Initialize > Yes to restore factory defaults.

Service: 1-877-267-8437; www.brother-usa.com