Brother P-touch H75 Manual

The Brother P-touch H75 is a compact, portable label maker featuring a full keyboard, multiple font styles and sizes, decorative frames, various tape cassettes, and a built-in cutter. It supports one-touch printing, auto-numbering, and multiple label formats. Powered by AC adapter or optional batteries. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to Power 7. Creating Labels 8. Advanced Functions 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Full keyboard, LCD display, Tape cassette compartment, Cutter lever, Power connector, Battery compartment.

Feature	Description
LCD Display	Shows text, format, and settings before printing
Full Keyboard	QWERTY layout with function keys for quick access
Tape Cassette Slot	Accepts various Brother TZe tape widths (3.5mm, 6mm, 9mm, 12mm)
Built-in Cutter	Manual lever for cutting tape after printing
Power Connector	For AC adapter input
Battery Compartment	Holds 6 AA batteries for portable use
Function Key	Accesses font, size, style, and frame options
Print Key	Initiates label printing
Power Key	Turns label maker on/off
Clear/Backspace Key	Deletes characters or exits menus

Installation

Unpack and inspect contents. Place on clean, flat surface.

Insert batteries: Open battery compartment, insert 6 AA batteries observing polarity.
Load tape cassette: Open cassette cover, insert tape with printed side facing out, close cover.
Connect AC adapter: Plug adapter into power jack and wall outlet (optional).
Power on: Press POWER key to turn on the unit.

WARNING! Use only Brother TZe tape cassettes. Do not force cassette into slot.

First-Time Setup

Power on the label maker; follow on-screen prompts.

Set language: Press FUNCTION, select LANGUAGE, choose ENGLISH (default).
Set tape width: Unit auto-detects tape; confirm on display.
Adjust contrast: Press FUNCTION > SETTINGS > LCD CONTRAST.
Test print: Type sample text and press PRINT to verify operation.

CAUTION! Keep fingers clear of cutter lever during operation.

Specifications

Model: Brother P-touch H75.
Tape Compatibility: Brother TZe series tapes (3.5mm, 6mm, 9mm, 12mm).
Fonts: Multiple styles and sizes (6 to 24 point).
Frames: Over 100 decorative frames and symbols.
Display: LCD with backlight (adjustable contrast).
Power Source: AC adapter (included) or 6 AA batteries (optional).
Battery Life: Approx. 100 labels with alkaline batteries.
Operating Temp: 50°F to 104°F (10°C to 40°C).

Controls and Settings

Access functions via FUNCTION key or direct keys. Front Panel: POWER, PRINT, CLEAR, Cursor keys.

Keyboard: Alphanumeric keys, FUNCTION, PRINT, POWER, CLEAR, Arrow keys.

Text Format: Font (Gothic, Script), Size (Small, Medium, Large), Style (Bold, Italic, Underline). Label Design: Frames, Symbols, Auto-numbering, Sequential printing. System: Language, LCD contrast, Auto power off, Tape width setting.

Connecting to Power

Use AC adapter for continuous use or batteries for portability.

For AC power: Connect adapter to unit and wall outlet.
For batteries: Install 6 AA batteries in compartment.
Power on: Press POWER key; battery icon shows level.

Tip: Use fresh alkaline batteries for best performance. Remove batteries if not used for extended periods.

Creating Labels

Supports text labels with frames, symbols, and auto-formatting.

Enter text: Type desired label text using keyboard.
Format text: Press FUNCTION to select font, size, style.
Add frames/symbols: Press FRAME key, browse and select.
Preview: Text appears on LCD display.
Print: Press PRINT key; label prints and advances automatically.
Cut: Use manual cutter lever to separate label.
Peel and apply: Remove backing and apply label to surface.

WARNING! Do not pull tape during printing. Allow cutter to fully engage before releasing lever.

Advanced Functions

Auto-numbering: Create sequential labels (001, 002...). Mirror printing: For inside glass application. Multiple copies: Print up to 9 copies of same label. Memory: Store frequently used labels for quick recall.

Care & Maintenance

Unplug or remove batteries before cleaning. Use dry, soft cloth; do not use liquids or abrasives.

CAUTION! Keep tape compartment clean; avoid dust and debris. Store in cool, dry place.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © Brother Industries, Ltd. For support, visit www.brother-usa.com or contact Brother Customer Service at 1-877-276-8437.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Batteries/adapter	Check battery polarity; ensure adapter plugged in securely.
No text on display	Contrast setting	Adjust LCD contrast via FUNCTION > SETTINGS.
Tape not feeding	Cassette jam/empty	Eject and reload cassette; replace if empty.
Poor print quality	Dirty print head	Clean print head with dry cotton swab (unit off).
Key not responding	Debris under key	Turn off, gently clean around key with soft brush.

Reset: Remove batteries/adapter for 2 minutes, then reconnect.

Service: 1-877-276-8437; www.brother-usa.com