Brother P-touch 1830 Manual

The Brother P-touch 1830 is a compact, easy-to-use electronic labeler designed for home and office use. It features a full keyboard, LCD display, multiple font styles and sizes, various tape cassettes, automatic tape cutting, and a rechargeable battery option. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. First-Time Use 4. Specifications 5. Controls and Functions 6. Creating Labels 7. Advanced Features 8. Maintenance & Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Full keyboard, LCD display, Tape cassette compartment, Power adapter port, Battery compartment, Cutter lever.

Feature	Description
LCD Display	Shows text, symbols, and formatting before printing
Full Keyboard	QWERTY layout with function keys for easy text entry
Tape Cassette	Accepts 3.5mm, 6mm, 9mm, and 12mm laminated tape
Automatic Cutter	Cuts tape automatically after printing (optional setting)
Power Options	AC adapter or 6 AA batteries (rechargeable recommended)
Font Styles	Multiple fonts (e.g., Gothic, Sans Serif, Script)
Font Sizes	Small, medium, large, and extra-large options
Frames & Borders	Add decorative frames to labels
Symbols	Library of over 100 symbols for enhanced labels
Memory Function	Stores frequently used labels for quick recall

Installation & Setup

Unpack and inspect contents. Place on clean, flat surface.

Install batteries: Open battery compartment, insert 6 AA batteries observing polarity.
Load tape cassette: Open cassette cover, insert tape with printed side facing out, close cover.
Connect power (optional): Plug AC adapter into port and wall outlet for continuous use.
Power on: Press POWER button; LCD should illuminate.

WARNING! Use only recommended Brother tape cassettes. Incorrect tape may cause jamming.

First-Time Use

Power on the labeler; follow on-screen prompts on LCD.

Set language: Press FUNCTION, then LANGUAGE to select preferred language.
Set tape width: Machine auto-detects tape width; confirm on display.
Test print: Type "TEST" and press PRINT to ensure proper operation.
Adjust print density: Use FUNCTION + PRINT MODE for darker/lighter prints.

CAUTION! Keep fingers away from cutter area during operation.

Specifications

Model: Brother P-touch 1830.
Tape Widths: 3.5mm, 6mm, 9mm, 12mm.
Print Speed: Approx. 10mm/sec.
LCD Display: 1-line, 12-character capacity.
Power Supply: AC adapter (AD-24) or 6 AA batteries.
Battery Life: Approx. 100 labels (alkaline batteries).
Memory: Stores up to 9 frequently used labels.
Fonts: 5 font styles, 4 sizes each.
Dimensions: 6.3" (W) x 7.1" (D) x 2.4" (H).
Weight: Approx. 1.5 lbs (without batteries).

Controls and Functions

Access functions via dedicated keys or FUNCTION menu. Front Panel: POWER, PRINT, CUT (manual), LEFT/RIGHT arrows, BACKSPACE.

Keyboard: Alphabet keys, Number keys, SPACE, SHIFT, FUNCTION, FONT, SIZE, FRAME, SYMBOL, UNDERLINE, MEMORY.

Text Formatting: FONT to cycle styles; SIZE for small/medium/large; UNDERLINE for emphasis. Label Design: FRAME for borders; SYMBOL for icons; ALIGN for left/center/right. System: FUNCTION menu for language, auto-cut on/off, print density, reset.

Creating Labels

Basic label creation in 5 steps.

Power on and ensure tape is loaded.
Type text using keyboard; use BACKSPACE to correct.
Format text: Press FONT or SIZE to change appearance.
Preview: LCD shows how label will look.
Print: Press PRINT; tape advances and cuts automatically if enabled.

Tip: Use SHIFT for capital letters or alternate symbols on keys.

Advanced Features

Utilize memory, frames, and sequential numbering.

Memory Store: Type label, press MEMORY then number key (1-9) to save.
Memory Recall: Press MEMORY then number to retrieve saved label.
Frames/Borders: Press FRAME repeatedly to cycle through options.
Sequential Numbering: Use FUNCTION + NUMBER to print sequences (e.g., 1,2,3).
Mirror Printing: FUNCTION + PRINT MODE for reverse text (e.g., for window signs).
Tape Saver: FUNCTION + LENGTH to minimize margin space.

WARNING! Do not pull tape during printing; allow cutter to operate fully.

Maintenance & Care

Unplug or remove batteries before cleaning. Use dry, soft cloth; never use liquids.

Cutter blade: Gently wipe with cotton swab if adhesive residue accumulates.
Keyboard/LCD: Wipe with slightly damp cloth, then dry immediately.
Tape path: Remove tape cassette and inspect for debris; blow out dust.
Battery contacts: Clean with dry cloth if corroded.

CAUTION! Never insert objects into tape slot or cutter mechanism.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © Brother Industries, Ltd. For support, visit www.brother-usa.com or contact 1-877-467-4289. This product uses thermal printing technology; no ink or toner required.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Dead batteries/loose adapter	Replace batteries; ensure adapter is firmly connected.
LCD blank	Power/brightness	Check power; adjust contrast via FUNCTION + CONTRAST.
Tape not feeding	Cassette improperly loaded	Eject cassette, reload correctly ensuring it clicks into place.
Poor print quality	Low battery/dirty print head	Replace batteries; clean print head with dry cotton swab.
Text not appearing	Font setting/tape width	Change font/size; ensure text fits within tape width.
Cutter not working	Auto-cut disabled/jammed	Enable auto-cut in FUNCTION menu; clear jammed tape gently.
Memory not saving	Memory full/batteries dead	Clear memory slots; replace batteries before storing.

Reset: Press FUNCTION + POWER to restore factory defaults if issues persist.

Service: 1-877-467-4289; www.brother-usa.com